浏览全部资源
扫码关注微信
1.甘肃中医药大学药学院,兰州 730000
2.甘肃省人民医院药剂科,兰州 730000
Published:15 November 2023,
Received:21 April 2023,
Revised:07 September 2023,
扫 描 看 全 文
毛小文,顾志荣,王园园等.基于QbD理念的双叶枇杷颗粒成型工艺优化及物理指纹图谱研究 Δ[J].中国药房,2023,34(21):2608-2612.
MAO Xiaowen,GU Zhirong,WANG Yuanyuan,et al.Optimization of molding process and physical fingerprint of Shuangye pipa granules based on QbD concept[J].ZHONGGUO YAOFANG,2023,34(21):2608-2612.
毛小文,顾志荣,王园园等.基于QbD理念的双叶枇杷颗粒成型工艺优化及物理指纹图谱研究 Δ[J].中国药房,2023,34(21):2608-2612. DOI: 10.6039/j.issn.1001-0408.2023.21.07.
MAO Xiaowen,GU Zhirong,WANG Yuanyuan,et al.Optimization of molding process and physical fingerprint of Shuangye pipa granules based on QbD concept[J].ZHONGGUO YAOFANG,2023,34(21):2608-2612. DOI: 10.6039/j.issn.1001-0408.2023.21.07.
目的
2
基于质量源于设计(QbD)理念优化双叶枇杷颗粒的成型工艺,并进行物理指纹图谱分析。
方法
2
以双叶枇杷颗粒干浸膏粉为主药,颗粒的总黄酮保留率、吸湿率、溶化率、休止角和成型率为评价指标,基于单因素实验结合熵权法和Box-Behnken响应面设计优化双叶枇杷颗粒的成型工艺,并进行验证。通过8个二级物理指标(相对均齐度、水分、吸湿率、豪斯纳比、休止角、松密度、振实密度和孔隙率)对最优成型工艺制得的10批双叶枇杷颗粒进行物理指纹图谱分析。
结果
2
在固定辅料为可溶性淀粉-麦芽糊精-甘露醇(质量比为1∶1∶1),润湿剂(乙醇)质量分数为95%的条件下,双叶枇杷颗粒的最优成型工艺为药辅比1∶0.8(
m
/
m
),95%乙醇用量37%,干燥温度59 ℃,干燥时间28 min。3次验证实验结果显示,平均综合得分为0.879 6分,与模型预测值(0.881 9分)的RSD为1.97%。10批双叶枇杷颗粒的物理指纹图谱与对照物理指纹图谱的相似度均大于0.99。
结论
2
本研究所优化的成型工艺稳定可行,以此工艺制得的双叶枇杷颗粒物理性状稳定、可控。
OBJECTIVE
2
To optimize the molding process of Shuangye pipa granules based on the concept of quality by design (QbD) and analyze its physical fingerprint.
METHODS
2
The dry extract of Shuangye pipa granules was used as the main drug. The retention rate of total flavonoid, moisture absorption rate, dissolution rate, angle of repose and molding rate of the granules were selected as evaluation indexes. The single-factor test combined with the entropy weight method and Box-Behnken response surface design was used to optimize the molding process, and validation test was conducted. The physical fingerprints of 10 batches of Shuangye pipa granules prepared by the optimal process were comprehensively analyzed by eight secondary physical indexes (relative homogeneity, moisture, moisture absorption rate, Hausner ratio, angle of repose, bulk density, tap density and porosity).
RESULTS
2
The optimal molding process of Shuangye pipa granules was as follows: soluble starch-maltodextrin-mannitol was 1∶1∶1 (
m
/
m
/
m
), 95% ethanol was as wetting agent and the amount of it was 37%, the drug-assisted ratio was 1∶0.8 (
m
/
m
), the drying temperature was 59 ℃, drying time was 28 min. The results of 3 validation tests showed that the average comprehensive score was 0.879 6, the RSD of which with prediction value (0.881 9 score) was 1.97%. The similarity between the physical fingerprints of 10 batches of Shuangye pipa granules and the control physical fingerprint was higher than 0.99.
CONCLUSIONS
2
The optimized molding process of Shuangye pipa granules is stable and feasible, and the physical property of Shuangye pipa granules is stable and controllable.
双叶枇杷颗粒成型工艺Box-Behnken响应面设计熵权法物理指纹图谱质量源于设计
molding processBox-Behnken response surface designentropy weight methodphysical fingerprintquality by design
王逸飞,朱振宇,吴志生,等. QbD理念的中药缓控释制剂的设计与研发研究[J]. 中国中药杂志,2019,44(20):4317-4321.
WANG Y F,ZHU Z Y,WU Z S,et al. Research on the design and development of sustained and controlled release preparations of traditional Chinese medicine based on QbD concept[J]. China J Chin Mater Med,2019,44(20):4317-4321.
马天翔,顾志荣,许爱霞,等. 基于OPLS结合熵权TOPSIS法对不同产地锁阳的鉴别与综合质量评价[J]. 中草药,2020,51(12):3284-3291.
MA T X,GU Z R,XU A X,et al. Identification and comprehensive quality evaluation of Cynomorium songaricum in different producing areas based on OPLS combined with entropy weight TOPSIS method[J]. Chin Tradit Herb Drugs,2020,51(12):3284-3291.
国家药典委员会. 中华人民共和国药典:四部[M]. 2020年版. 北京:中国医药科技出版社,2020:145-146.
Chinese Pharmacopoeia Commission. Chinese pharmacopoeia:volume Ⅳ[M]. 2020 edition. Beijing:China Medical Science and Technology Press,2020:145-146.
刘本涛,梁旭华,赵艳艳,等. 无糖型银花感冒颗粒的成型工艺[J]. 医药导报,2020,39(2):202-207.
LIU B T,LIANG X H,ZHAO Y Y,et al. Molding process of sugarless Yinhua ganmao granules[J]. Her Med,2020,39(2):202-207.
王晴,徐冰,王芬,等. 桂枝茯苓胶囊内容物吸湿性预测建模研究[J]. 中国中药杂志,2020,45(2):242-249.
WANG Q,XU B,WANG F,et al. Study on prediction modeling of hygroscopicity of Guizhi fuling capsule contents[J]. China J Chin Mater Med,2020,45(2):242-249.
李素丽,玄敏,杨涛,等. 鹿红方颗粒制备工艺优化及其质量评价[J]. 中成药,2023,45(8):2477-2483.
LI S L,XUAN M,YANG T,et al. Optimization of preparation process and quality evaluation for Luhong recipe granules[J]. Chin Tradit Pat Med,2023,45(8):2477-2483.
闫治攀,王雪梅,毕映燕,等. 消肿止痛颗粒的制备[J]. 中成药,2020,42(7):1692-1697.
YAN Z P,WANG X M,BI Y Y,et al. Preparation of Xiaozhong zhitong granules[J]. Chin Tradit Pat Med,2020,42(7):1692-1697.
马天翔,马转霞,许爱霞,等. 消风止痒颗粒成型工艺的优化[J]. 中成药,2021,43(8):2161-2164.
MA T X,MA Z X,XU A X,et al. Optimization of mol- ding technology of Xiaofeng zhiyang granules[J]. Chin Tradit Pat Med,2021,43(8):2161-2164.
夏提古丽·塔西买买提,赵媛,刘艺,等. 熵权法-层次分析法结合Box-Behnken响应面法优化雪莲益肾方的提取工艺[J]. 中国药房,2023,34(15):1858-1862.
Xiatiguli·Taximaimaiti,ZHAO Y,LIU Y,et al. Optimization of the extraction process for Xuelian yishen formula by the combination of entropy weight method-analytic hierarchy process with Box-Behnken response surface methodology[J]. China Pharm,2023,34(15):1858-1862.
汪盛华,闫明,徐芳芳,等. 基于物料粉体学性质对5种制剂品种颗粒溶化性的相关性研究[J]. 中草药,2022,53(22):7082-7090.
WANG S H,YAN M,XU F F,et al. Study on correlation of particle solubility of five kinds of preparation based on material powder science[J]. Chin Tradit Herb Drugs,2022,53(22):7082-7090.
李鹏程,刘涛,张文文,等. 基于QbD理念的黄槐片制备工艺及物理指纹图谱研究[J]. 中草药,2018,49(7):1576-1582.
LI P C,LIU T,ZHANG W W,et al. Study on preparation technology and physical fingerprint of Huanghuai tablets based on quality by design[J]. Chin Tradit Herb Drugs,2018,49(7):1576-1582.
0
Views
2
下载量
0
CSCD
Publicity Resources
Related Articles
Related Author
Related Institution